Can you use sdk.development.worker.console_cr_flush_period ?

SuccessfulKoala55 I can try to make one, let’s see 🙂

Well, it's probably possible to add a hack in your code that always sets this value in the internal logger class, but how many agents are you running? If it's very important, we guess we can add a Logger interface that allows setting this properly programmatically.

Does that mean that agents do not read this parameter?

What will this parameter do?

JitteryCoyote63 which version are you using?

So I have to specify it on every clearml-agent in the respective clearml.conf?

so the task they execute must have clearml installed?

For me this does not work (at least with nested tqdm bars, did not try single ones yet).

It roughly adds a line every 5 secs and do not overwrite last line

When you say it is an SDK parameter this means that I only have to specify it on the computer where I start the task from, right? So an clearml-agent would read this parameter from the task itself.

SuccessfulKoala55 Am I doing/saying something wrong regarding the problem of flushing every 5 secs (See my previous message)

btw SuccessfulKoala55 the parameter is not documented in https://allegro.ai/clearml/docs/docs/references/clearml_ref.html#sdk-development-worker

pip install clearml==1.0.2

BTW - it's an SDK parameter, not an agent parameter

Add carriage return flush support using the sdk.development.worker.console_cr_flush_period configuration setting (GitHub trains Issue 181)

ReassuredTiger98 no, this is an SDK configuration parameter which is read from your clearml.conf file

theoretically no

It's not the agents, but the SDK that runs as part of the task they execute

I'm not sure... Do you have a sample code to reproduce?

Ok, in that case it probably doesn’t work, because if the default value is 10 secs, it doesn’t match what I get in the logs of the experiment: every second the tqdm adds a new line

Nice! What is the default value?

TimelyPenguin76 clearml 0.17.5 and clearml-agent 0.17.2

allows you to control the rate at which the carriage return is flushed

Ok. I just wanted to make sure I have configured my agent properly. Just want to make sure I have to set it on all agents.

👍

Yes, I will try 🙂

Can you check it with the latest? 1.0.2 ?

You're right, its a relatively internal parameter, and is currently not documented in the default configuration file. Perhaps it's a good idea to add it to the formal documentation... default value is 10 :
` # Carriage return (\r) support. If zero (0) \r treated as \n and flushed to backend

Carriage return flush support in seconds, flush consecutive line feeds (\r) every X (default: 10) seconds

console_cr_flush_period: 10 `